Zum Hauptinhalt wechseln
Englisch
Deutsch
Schritt 2
To remove the blade gear, turn the power base so that the bottom part faces up. Remove the quality control sticker The sticker covers a rectangular opening. Within this opening is a slot for a flat tip screwdriver. It is possible that it is somewhat off center like in this picture.
  • To remove the blade gear, turn the power base so that the bottom part faces up.

  • Remove the quality control sticker

  • The sticker covers a rectangular opening. Within this opening is a slot for a flat tip screwdriver. It is possible that it is somewhat off center like in this picture.

  • This is caused by the motor not being properly centered within the base. This appears to be common (the motor does not have any bottom support within the base)

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.