Zum Hauptinhalt wechseln
Englisch
Deutsch
Schritt 8
To remove the fan blade, use a screwdriver and place it between the body of the Magic Bullet and the fan blade. Then pull up on the screw driver. It may be necessary to do this on opposite sides a few times since the fan blade is a pressfit on the shaft. Turn the body of the mixer over and remove the three rubber spacers
  • To remove the fan blade, use a screwdriver and place it between the body of the Magic Bullet and the fan blade. Then pull up on the screw driver.

  • It may be necessary to do this on opposite sides a few times since the fan blade is a pressfit on the shaft.

  • Turn the body of the mixer over and remove the three rubber spacers

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.