Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 5 Anleitungen, die diese beinhalten.

Englisch
Italienisch
Schritt 4
Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter. Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables. Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.
  • Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.

  • Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.

Assicurati di aver rimosso la scheda SD. Con uno strumento in plastica adatto fai leva sulla scocca inferiore iniziando dalla parte in basso e continuando sul perimetro.

Ci sono due cavi a nastro che connettono la scocca alla scheda elettronica. Stai attento a non tirare troppo la scocca, potresti romperli.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.