Repariere deine Sachen

Recht auf Reparatur

Store

Hinweis: Du bearbeitest gerade die grundständige Anleitung, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 7 Anleitungen, die diesen Schritt beinhalten.

Zurück zur Anleitung
Englisch
Deutsch
Nächster Schritt

Schritt 1 übersetzen

Schritt 1
Loosen the two 4.2 mm-length screws located at the top of the back cover. The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws; it is not necessary to remove the washers for this repair guide.

  • Loosen the two 4.2 mm-length screws located at the top of the back cover.

  • The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws; it is not necessary to remove the washers for this repair guide.

An der Abdeckung sind oben zwei 4,2 mm Schrauben. Drehe sie heraus.

Die Schrauben haben feste Unterlegscheiben, so dass sie hängen bleiben. Es ist nicht nötig sie zu entfernen.

[* red] UnscrewLoosen the two 4.2 mmmm-length screws that are located at the top of the back cover.
[* black
[* icon_note] The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws,screws; it is not necessary to remove the washers for this repair guide.
[* red] UnscrewLoosen the two 4.2 mmmm-length screws that are located at the top of the back cover.
[* black
[* icon_note] The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws,screws; it is not necessary to remove the washers for this repair guide.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.