Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 18 Anleitungen, die diese beinhalten.

Englisch
Chinesisch
Schritt 9
Remove the following Phillips screws securing the front panel assembly cable bracket:
  • Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.5 mm screw

  • One 2.9 mm screw

  • Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.

保持前面板张开立起约90度,卸下前面板排线固定板上的五颗Phillips螺丝。

三颗1.2 mm螺丝

一颗1.7 mm螺丝

一颗3.1mm螺丝

-[* black] While holding the front panel open at about a 90º angle, remove the following screws securing the front panel assembly cable bracket:
- [* red] Three 1.2 mm Phillips #00 screws
- [* orange] One 1.5 mm Phillips #00 screw
- [* yellow] One 2.9 mm Phillips #00 screw
+[* black] Remove the following Phillips screws securing the front panel assembly cable bracket:
+ [* red] Three 1.2 mm screws
+ [* orange] One 1.5 mm screw
+ [* yellow] One 2.9 mm screw
+[* icon_caution] ***Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.***

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.