Zum Hauptinhalt wechseln
Englisch
Deutsch

Schritt 3 übersetzen

Schritt 3
Remove the two 3.8mm screws holding down the wireless card with your Phillips #00 Screwdriver. Gently pull out your wireless card from its top side to remove it from its holding. Gently pull out your wireless card from its top side to remove it from its holding.
  • Remove the two 3.8mm screws holding down the wireless card with your Phillips #00 Screwdriver.

  • Gently pull out your wireless card from its top side to remove it from its holding.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.