Repariere deine Sachen

Recht auf Reparatur

Store

Zurück zur Anleitung
Englisch
Deutsch
Vorheriger Schritt

Schritt 14 übersetzen

Schritt 14
If you bought a full LCD and Digitizer assembly, then you can discard the old Digitizer and just replace it with the new one. If you only bought the LCD component and would like to reuse the current digitizer then follow the steps below. Peel off the excess adhesive from the bezel of the glass screen.
Making the Glass Screen Stick Again

  • If you bought a full LCD and Digitizer assembly, then you can discard the old Digitizer and just replace it with the new one. If you only bought the LCD component and would like to reuse the current digitizer then follow the steps below.

  • Peel off the excess adhesive from the bezel of the glass screen.

  • Line the bezel of the glass screen with 3M double sided adhesive tape. You will be able to stick it back on easily.

Titel hinzufügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.