Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Englisch
Chinesisch
Schritt 3
Defective Light: Light Keeper instructions
  • You can also use a Light Keeper Pro or similar continuity testing device to pinpoint burnt out bulbs.

  • Plug in the strand of lights, and remove a bulb to connect the Light Keeper Pro to an empty socket.

  • Pull the trigger on the Light Keeper several times to bypass the bad bulb and light the whole strand, leaving the bad bulb dim.

  • Replace the bulb you used to test the strand, then remove and replace any bad bulbs. You can use the Light Keeper to test the new bulbs before you install them.

您可以使用 Light Keeper Pro 或类似的连续性测试设备来查明被烧坏的灯泡。

插入灯串,并取出一个灯泡连接 Light Keeper Pro 到一个空的插座。

拉动 Light Keeper 上的触发器几次绕过坏灯泡,点亮整个灯丝,使坏掉的灯泡变暗。

更换用来测试灯串的灯泡,然后取出并更换任何损坏的灯泡。 在安装之前,您可以使用 Light Keeper 测试新的灯泡。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.