Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Englisch
Chinesisch

Schritt 6 übersetzen

Schritt 6
Strip about 1/2" of insulation from both wires. Twist the wires together and insert them into the twist-on wire connector. Turn the connector several times until the cap feels secure, and you can tug on it without it falling off.
  • Strip about 1/2" of insulation from both wires.

  • Twist the wires together and insert them into the twist-on wire connector. Turn the connector several times until the cap feels secure, and you can tug on it without it falling off.

  • After testing the lights and making sure the bad socket fixed the problem, consider putting in some silicone sealant (or museum wax) into the cap in order to keep moisture out and prevent the wires from corroding.

拨开包裹住两根电线的绝缘层2厘米

将两根电线绞在一起并插入扭绞线连接器中。转动连接器直到你认为其已经绞紧了,然后你就可以将其放置且不用拔下来。

测试灯是否修好且确保插座固定好后,将硅胶密封剂(或蜡)滴入连接器中确保连接器内部隔绝潮湿环境且阻止电线被腐蚀。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.