Zum Hauptinhalt wechseln
Englisch
Italienisch

Schritt 1 übersetzen

Schritt 1
In order to open the fan, you will need a Philips head screw driver, micro screw driver, and safety glasses. Start by unplugging the fan and removing the screws that hold the cover into place.  My fan had 7 screws; six were obvious but one was hidden behind a plastic cap near the top/back of the unit (arrow in 2nd pic). In order to access the hidden screw, push in on one side of the cap so that it rotates and then slide the micro screw driver behind it.  Pry the cap out and remove that screw.
Opening the fan's case
  • In order to open the fan, you will need a Philips head screw driver, micro screw driver, and safety glasses.

  • Start by unplugging the fan and removing the screws that hold the cover into place. My fan had 7 screws; six were obvious but one was hidden behind a plastic cap near the top/back of the unit (arrow in 2nd pic).

  • In order to access the hidden screw, push in on one side of the cap so that it rotates and then slide the micro screw driver behind it. Pry the cap out and remove that screw.

  • Next, gently remove the cover. The right side of it will likely have tabs holding it in place (circled in 3rd pic). You will need to push in on the cover at those locations in order to pop the tabs out. Be patient and gentle and eventually you’ll have the cover off.

Per aprire la ventola, ti servirà un cacciavite a croce Phillips, un piccolo cacciavite e degli occhiali protettivi.

Inizia staccando la corrente dalla ventola e svitando le viti che tengono ferma la copertura. La mia ventola aveva 7 viti: sei abbastanza evidenti ma una era nascosta dietro un cappuccio in plastica vicino alla parte superiore del retro dell'unità (la freccia nella seconda immagine).

Per poter accedere alla vite nascosta, spingi all'interno un lato del cappuccio in modo che ruoti, quindi infilaci dietro il piccolo cacciavite. Fai leva sul cappuccio per rimuoverlo e svita la vite.

Ora rimuovi delicatamente la copertura. Il lato destro probabilmente avrà delle alette che lo tengono fermo (cerchiate nella terza immagine). Dovrai spingere all'interno la copertura in quelle posizioni per rilasciare le alette. Sii paziente e delicato e prima o poi rimuoverai la copertura.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.