Zum Hauptinhalt wechseln
Englisch
Französisch
Schritt 2
Use the screwdriver to remove the four 2.4 mm Phillips screws. Lift up the LCD screen from the front case. Potential for device damage: The wire is still connected to the board in the other side.
  • Use the screwdriver to remove the four 2.4 mm Phillips screws.

  • Lift up the LCD screen from the front case.

  • Potential for device damage: The wire is still connected to the board in the other side.

Retirez les quatre vis Phillips de 2,4 mm comme indiqué sur l'image.

Soulevez l'écran LCD du boîtier avant.

Méfiez-vous du fil qui est connecté à la carte de l'autre côté.

-[* red] Remove the four 2.4 mm Phillips screws as shown in picture.
+[* red] Use the screwdriver to remove the four 2.4 mm Phillips screws.
[* black] Lift up the LCD screen from the front case.
-[* icon_caution] Beware of the wire that is connected to the board in the other side.
+[* icon_caution] Potential for device damage: The wire is still connected to the board in the other side.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.