Zum Hauptinhalt wechseln
Englisch
Französisch

Schritt 1 übersetzen

Schritt 1
Evenly heat the surface of the screen using your heating tool to loosen the adhesive that is holding the screen to the phone case. If using the heating pad, you may have to reheat it once or twice during this process.
  • Evenly heat the surface of the screen using your heating tool to loosen the adhesive that is holding the screen to the phone case.

  • If using the heating pad, you may have to reheat it once or twice during this process.

  • If you're using a heat gun, avoid heating one spot for more than a few seconds.

Avant de pouvoir retirer l'écran, vous devez d'abord chauffer la surface uniformément pour desserrer l'adhésif.

Vous devrez peut-être réchauffer le coussin chauffant une ou deux fois pour obtenir suffisamment de chaleur sur l'écran.

Si vous utilisez un pistolet thermique, ne maintenez pas la chaleur en un seul endroit pendant quelques secondes. Au lieu de cela, exécutez la chaleur le long du bord extérieur de l'écran avec un mouvement de brossage.

-[* black] Before you can remove the screen, you must first heat the surface evenly to loosen the adhesive.
-[* icon_note] You may have to reheat the heating pad once or twice to get enough heat onto the screen.
-[* icon_caution] If using a heat gun, do not hold the heat in one spot for more than a few seconds. Instead, run the heat along the outer edge of the screen with a brushing motion.
+[* black] Evenly heat the surface of the screen using your heating tool to loosen the adhesive that is holding the screen to the phone case.
+[* icon_note] If using the heating pad, you may have to reheat it once or twice during this process.
+[* icon_caution] If you're using a heat gun, avoid heating one spot for more than a few seconds.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.