Repariere deine Sachen

Recht auf Reparatur

Store

Hinweis: Du bearbeitest gerade die grundständige Anleitung, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 4 Anleitungen, die diesen Schritt beinhalten.

Zurück zur Anleitung
Englisch
Deutsch
Vorheriger Schritt

Schritt 4 übersetzen

Schritt 4
Press the suction cup to the back panel to secure it. With the help of the suction cup, pull up on the panel to completely detach it from the device. Use the suction cup to safely remove the panel from the device. As you work around the panel's edges, the lingering heat may cause the remaining adhesive to reattach the panel to the device, be sure to lift the back panel before the glue has time to set back.

  • Press the suction cup to the back panel to secure it.

  • With the help of the suction cup, pull up on the panel to completely detach it from the device.

  • Use the suction cup to safely remove the panel from the device. As you work around the panel's edges, the lingering heat may cause the remaining adhesive to reattach the panel to the device, be sure to lift the back panel before the glue has time to set back.

Drücke den Saugnapf an der Scheibe an, bis er gut festsitzt.

Ziehe mit Hilfe des Saugnapfs die Rückabdeckung vom Gerät ab.

Der Saugnapf hilft dir beim Ablösen der Abdeckung. Passe dabei auf, dass sie sich durch die vorhandene Restwärme nicht wieder verklebt.

[* black] Press the suction cup to the rearback panel to secure it.
[* black] Press the suction cup to the rearback panel to secure it.
[* black] With the help of the suction cup, pull up on the panel to completely detach it from the device.
[* icon_note] Use the suction cup to safely remove the panel from the device. As you work around the panel's edges, the lingering heat may cause the remaining adhesive to reattach the panel to the devicedevice, be sure to lift the back panel before the glue has time to set back.
[* icon_note] Use the suction cup to safely remove the panel from the device. As you work around the panel's edges, the lingering heat may cause the remaining adhesive to reattach the panel to the devicedevice, be sure to lift the back panel before the glue has time to set back.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.