Zum Hauptinhalt wechseln
Englisch
Deutsch
Schritt 13
Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
  • Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.

  • Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.

  • Solder the resistor to the PCB and clip off the excess leads.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.