Zum Hauptinhalt wechseln
Englisch
Niederländisch
Schritt 5
Remove 4 - 4mm screws.  Once removed the barrel will release and extend. Make a marking (i used white) to align with the White marking on the Focus ring to make re-assembly easier Notice the 3 Grooves.  These are the slide grooves where the barrel moves up and down.  You will need to release the pins from the grooves at each point - one by one by using pressure.
Removing the focus ring Step 1
  • Remove 4 - 4mm screws. Once removed the barrel will release and extend.

  • Make a marking (i used white) to align with the White marking on the Focus ring to make re-assembly easier

  • Notice the 3 Grooves. These are the slide grooves where the barrel moves up and down. You will need to release the pins from the grooves at each point - one by one by using pressure.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.