Zum Hauptinhalt wechseln
Englisch
Spanisch

Schritt 1 übersetzen

Schritt 1
Place the NUC upside down and start by using a Phillips head screw driver to remove the lower screws on the lower case door. These screws are held in with retainers, so they won't fall out when you flip the lid.
Lower Lid
  • Place the NUC upside down and start by using a Phillips head screw driver to remove the lower screws on the lower case door.

  • These screws are held in with retainers, so they won't fall out when you flip the lid.

Coloque el NUC al revés y comience utilizando un destornillador de cabeza Phillips, como el controlador de PC All-in-One, para quitar los tornillos inferiores de la puerta inferior.

Estos tornillos se sujetan con retenedores, para que no se caigan al voltear la tapa.

[title] Lower Lid
-[* black] Place the NUC upside down and start by using a Phillips head screw driver, such as the [product|IF145-320|All-in-One PC Driver], to remove the lower screws on the lower case door.
+[* black] Place the NUC upside down and start by using a Phillips head screw driver to remove the lower screws on the lower case door.
[* black] These screws are held in with retainers, so they won't fall out when you flip the lid.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.