Einleitung
要更换或取出相机吗?来看看这个吧。
Was du brauchst
-
-
从设备底部拆下两个Phillips #00 螺丝
-
-
-
-
排线“3”由FPC型连接器固定。 在取下排线之前,必须先打开这个连接器:用一根塑料棒将白色/黑色塑料片向上翻起来,把剩下的带状电缆固定到位。 塑料片将向上旋转90度,松开排线。
-
将排线从连接器中取出,然后从iPhone上卸下屏幕。
-
-
-
拆下下面8颗螺丝
-
主板上的5颗2.3毫米的十字 #00 螺丝
-
主板上固定相机的2颗2.3毫米的十字 #00 螺丝
-
1颗在“Do Not Remove”标签下的螺丝
-
-
-
用撬棒分离相机和主板
There is a little silver clip that needs to go on top of the camera to secure it. If this is not done correctly the camera will not work. Ensure the small silver clip is secured the exact same way as you saw it initially, and ensure the cable is fitted correctly.
Can we get a picture or video of this. I tried to fix my iPhone using this guide and your comment is exactly why my camera will not work. It would be very helpful to see the position of the clip the way it is supposed to be connected.
Also the screw that holds the camera clip down is held by one of the small screws,
THE ONLY ONE WITH THREAD ALL THE WAY UP TO THE HEAD, the others only only 3/4's threaded. The correct position of that clip is in picture 11, I think.
Chewtah -
-
要重新组装您的设备,请按照相反的顺序执行这些指示。
要重新组装您的设备,请按照相反的顺序执行这些指示。
Rückgängig: Ich habe diese Anleitung nicht absolviert.
65 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
Ein Kommentar
Thanks for an awesome guide. On mine after getting it reassembled the camera had a green screen. The cable for the camera got slightly disconnected while putting things back together. I'm thinking because the one I got the ribbon was kinda stiff and straight when it had to fold to go back in properly it came slightly unplugged. I just squashed around the camera corner of the case pinching it, of course not to hard, and it came up and works perfectly now. Thanks again, my friend sold me this iphone cheap cause the camera was broke. Thanks to you its good as new.