Zum Hauptinhalt wechseln

1986-1993 Volvo 240 Spark Plug Wires Replacement

Was du brauchst

  1. 1986-1993 Volvo 240 Spark Plug Wires Replacement, Spark Plug Wires: Schritt 1, Bild 1 von 1
    • To avoid any confusion between which wire goes to which spark plug, replace spark plug wires one at a time. You may want to mark either the old or new wires to remind yourself which ones you've changed.

    • Disconnect the spark plug wire from the distributor cap by pulling it straight up.

  2. 1986-1993 Volvo 240 Spark Plug Wires Replacement: Schritt 2, Bild 1 von 2 1986-1993 Volvo 240 Spark Plug Wires Replacement: Schritt 2, Bild 2 von 2
    • Gently twist the spark plug boot back and forth and pull up to remove it from the spark plug.

    • When installing your new spark plug wires, it's a good idea to apply dielectric grease to the spark plug boots to prevent the electrical connections from being damaged by water or debris.

Abschluss

Install your new spark plug wires in the same manner that you removed the old ones.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

David Hodson

Mitglied seit: 04/13/10

150.358 Reputation

127 Anleitungen geschrieben

2 Kommentare

Doing this today. Thanks for the clear, reassuring steps to get it done :)

jeconnol - Antwort

These directions were great! Thank you. I got the wires on in about 40 minutes. Oh, and I’m a girlie girl. :)

Nancy - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 4,008