Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Take the Philips screwdriver and remove two Philips head screws on both sides of the high mount brake lamp.
-
Be sure to store the two Philips screws in a safe place so they don't get lost.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Pull out the truck high mount brake/tail light housing.
-
We recommend you pull out the housing with both hands so you don't break the water tight seal.
-
If in the event that you happen you break it, you may have some water leak issues so you would have to fix the high mount brake/tail lamp housing with some glue.
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove the stock bulbs from its socket.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Replace with the LED bulb.
-
Test your new LED truck high mount brake lamps to make sure everything works.
-
If the LED lights don't light up, check the polarity by flipping the bulbs 180 degrees.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Put back the light housing and screw in the two Philips screws.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.