Zum Hauptinhalt wechseln

Einleitung

This guide is to remove the headlamp. Left and right remove identical. This will have to be done to either change a light bulb or to remove the complete headlamp for exchange.

Werkzeuge

Ersatzteile

Keine Ersatzteile angegeben.

  1. Here is the Jeep GC. Removal of the headlamp is identical for both sides. By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen. Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy
    • Here is the Jeep GC. Removal of the headlamp is identical for both sides.

    • By opening the hood and looking straight down on the headlamp assembly, the 6mm hex head jack screw can be seen.

    • Use a 6mm socket and nut driver to remove the jack screw. 1/4 socket will not fit 9/32 does, but it is a bit sloppy

  2. Remove the long jack screw. Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward. Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.
    • Remove the long jack screw.

    • Grasp upper inboard and lower outboard corners of headlamp and forcefully pull headlamp outward.

    • Remove all bulb sockets from headlamp module. Separate headlamp from vehicle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer haben diese Anleitung absolviert.

oldturkey03

Mitglied seit: 29.09.2010

678.088 Reputation

107 Anleitungen geschrieben

It’s a 7mm socket

Don Marcos - Antwort

Not on mine. Just rechecked and it is a 6mm on my Jeep

oldturkey03 -

Thankful for simple instructions without any extra info or words ?

robinrogersk9 - Antwort

I’m removing it to replace fan cooling module. I heard I can cut through to get to it without disassembling the grill bumper etc

robinrogersk9 - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 3

Letzten 30 Tage: 26

Insgesamt: 5,676