Zum Hauptinhalt wechseln

2007 Honda CR-V Brake Light Replacement

Was du brauchst

  1. 2007 Honda CR-V Brake Light Replacement, Brake Light: Schritt 1, Bild 1 von 3 2007 Honda CR-V Brake Light Replacement, Brake Light: Schritt 1, Bild 2 von 3 2007 Honda CR-V Brake Light Replacement, Brake Light: Schritt 1, Bild 3 von 3
    • Grab the handle in the middle of the trunk.

    • Use the handle to pull the trunk open.

  2. 2007 Honda CR-V Brake Light Replacement: Schritt 2, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 2, Bild 2 von 2
    • Use a Phillips #00 screwdriver to remove the top and bottom screws.

  3. 2007 Honda CR-V Brake Light Replacement: Schritt 3, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 3, Bild 2 von 2
    • Pull back the tail light cover.

    • Hold it up; there are cords connected to the car inside.

  4. 2007 Honda CR-V Brake Light Replacement: Schritt 4, Bild 1 von 3 2007 Honda CR-V Brake Light Replacement: Schritt 4, Bild 2 von 3 2007 Honda CR-V Brake Light Replacement: Schritt 4, Bild 3 von 3
    • Untwist the faulty bulb counter-clockwise.

    • Pull the bulb out of the socket.

  5. 2007 Honda CR-V Brake Light Replacement: Schritt 5, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 5, Bild 2 von 2
    • Disconnect the bulb from the cord by popping it off.

  6. 2007 Honda CR-V Brake Light Replacement: Schritt 6, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 6, Bild 2 von 2
    • Pop in the Sylvania LongLife Mini Bulb 7443LL.

  7. 2007 Honda CR-V Brake Light Replacement: Schritt 7, Bild 1 von 3 2007 Honda CR-V Brake Light Replacement: Schritt 7, Bild 2 von 3 2007 Honda CR-V Brake Light Replacement: Schritt 7, Bild 3 von 3
    • Insert the bulb into the socket.

    • Twist the bulb in clockwise.

  8. 2007 Honda CR-V Brake Light Replacement: Schritt 8, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 8, Bild 2 von 2
    • Set the tail light cover back to the default position over the screw holes.

  9. 2007 Honda CR-V Brake Light Replacement: Schritt 9, Bild 1 von 2 2007 Honda CR-V Brake Light Replacement: Schritt 9, Bild 2 von 2
    • Use a Phillips #00 screwdriver to screw in the top and bottom screws.

Ziellinie

Dillon Laney

Mitglied seit: 02/21/23

169 Reputation

1 Anleitung geschrieben

Ein Kommentar

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 20

Letzte 30 Tage: 97

Insgesamt: 921