2016 Jeep Cherokee Windshield Wiper Replacement

Einleitung

Windshield wipers should get changed almost every six months based on usage. When the blades get damaged, it can cause a lack of visibility due to not contacting properly with the windshield surface. Here are a few easy steps for changing and replacing the 2016 Jeep Cherokee windshield wiper on your own.

Was du brauchst

Schritt 1 Windshield Wiper

2016 Jeep Cherokee Windshield Wiper Replacement, Windshield Wiper: Schritt 1, Bild 1 von 3

2016 Jeep Cherokee Windshield Wiper Replacement, Windshield Wiper: Schritt 1, Bild 2 von 3

2016 Jeep Cherokee Windshield Wiper Replacement, Windshield Wiper: Schritt 1, Bild 3 von 3

If the broken wiper is located on the passenger side, then you will need to purchase an 18-inch wiper.
If the damaged wiper is located on the driver side, then you will need a 26-inch wiper.

Bearbeiten

Schritt 2

2016 Jeep Cherokee Windshield Wiper Replacement: Schritt 2, Bild 3 von 3

Most blades are held in place with a tiny clip.
Push that clip up, while you are pushing the blade backwards.

Bearbeiten

Schritt 3

Once you get the blade free from the hook, push the blade down to disconnect it.

Bearbeiten

Schritt 4

2016 Jeep Cherokee Windshield Wiper Replacement: Schritt 4, Bild 3 von 3

After disconnecting the old wiper, position the new blade so that the hook points toward the area where you just detached the old wiper.

Bearbeiten

Schritt 5

Push the blade towards the arm.
Make sure the hook is inside the arm.
When completed, you will hear it click, this means that the wiper has been successfully installed.