Zum Hauptinhalt wechseln

360fly 4K SD Card Replacement

Was du brauchst

  1. 360fly 4K SD Card Replacement, Battery: Schritt 1, Bild 1 von 1
    • Flip the camera upside down and peel off the two plastic screw covers with the metal spudger to reveal the screws.

  2. 360fly 4K SD Card Replacement: Schritt 2, Bild 1 von 1
    • Remove the two 5 mm screws from the bottom of the camera with a T4 screwdriver.

    In the older model for Fly360 camera, the screws are PH000.

    Renjamin - Antwort

    In the old 360Fly HD camera, the screw requires a #00 Philips head screwdriver. Unfortunately for me, one of the screws on mine was torqued down a bit too tight, that I ended up stripping the screw head trying to loosen it by hand.

    XzTS - Antwort

  3. 360fly 4K SD Card Replacement: Schritt 3, Bild 1 von 2 360fly 4K SD Card Replacement: Schritt 3, Bild 2 von 2
    • Gently pry the plastic ring from around the charging plate with the metal spudger.

    • Remove the outside shell by pressing against the center of the charging plate and pulling the bottom shell away from the top shell.

  4. 360fly 4K SD Card Replacement: Schritt 4, Bild 1 von 1
    • Remove the five 2 mm screws using a T4 screwdriver.

    • Pull off the charging plate assembly.

  5. 360fly 4K SD Card Replacement: Schritt 5, Bild 1 von 2 360fly 4K SD Card Replacement: Schritt 5, Bild 2 von 2
    • Gently pry the plug off the port on the circuit board with a plastic opening tool.

    • Remove the four 2 mm screws using a T4 screwdriver.

    • Remove the circuit board from the device.

  6. 360fly 4K SD Card Replacement: Schritt 6, Bild 1 von 3 360fly 4K SD Card Replacement: Schritt 6, Bild 2 von 3 360fly 4K SD Card Replacement: Schritt 6, Bild 3 von 3
    • Remove the five 4 mm screws around the battery assembly with a T4 screwdriver.

    • Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

    • Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

    • Potential for device damage: Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

    Do I have to remove the battery to replace the SD card?

    BoB - Antwort

  7. 360fly 4K SD Card Replacement, SD Card: Schritt 7, Bild 1 von 1
    • Gently pry the plug from the motherboard and remove the motherboard from the assembly.

  8. 360fly 4K SD Card Replacement: Schritt 8, Bild 1 von 1
    • Remove the three 3 mm screws from the circuit assembly with a T4 screwdriver.

  9. 360fly 4K SD Card Replacement: Schritt 9, Bild 1 von 1
    • Gently pry out the plug from the circuit assembly.

  10. 360fly 4K SD Card Replacement: Schritt 10, Bild 1 von 1
    • Press and release the SD card to remove it from the circuit assembly.

    Does anyone know how large a card the 360fly can support? I’d like to put a 256gb card in if it will support it.

    BoB - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Jacob Herron

Mitglied seit: 11/08/17

463 Reputation

3 Anleitungen geschrieben

Team

IUPUI, Team S5-G3, Baechle Fall 2017 Mitglied von IUPUI, Team S5-G3, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G3

3 Mitglieder

3 Anleitungen geschrieben

Ein Kommentar

Really useful guide, thanks

John Erikson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 15

Insgesamt: 1,065