Zum Hauptinhalt wechseln

ASUS G713RC RAM Replacement

Was du brauchst

  1. ASUS G713RC RAM Replacement, RAM: Schritt 1, Bild 1 von 3 ASUS G713RC RAM Replacement, RAM: Schritt 1, Bild 2 von 3 ASUS G713RC RAM Replacement, RAM: Schritt 1, Bild 3 von 3
    • Warning: Do not touch any other components inside if you don't have to. It may result in damage and can destroy your laptop.

    • Remove the seven large screws using a Phillips #00 screwdriver.

    • Remove the four small screws using a Phillips #00 screwdriver.

    • Carefully lift the lid, being careful of the two cables connected to the laptop.

  2. ASUS G713RC RAM Replacement: Schritt 2, Bild 1 von 3 ASUS G713RC RAM Replacement: Schritt 2, Bild 2 von 3 ASUS G713RC RAM Replacement: Schritt 2, Bild 3 von 3
    • Carefully detach the two white cables that are connected to the lid.

    • Set aside the lid.

  3. ASUS G713RC RAM Replacement: Schritt 3, Bild 1 von 3 ASUS G713RC RAM Replacement: Schritt 3, Bild 2 von 3 ASUS G713RC RAM Replacement: Schritt 3, Bild 3 von 3
    • Carefully lift up each gray bar.

    • It is important that you don't completely remove the gray bar.

    • Remove the RAM.

  4. ASUS G713RC RAM Replacement: Schritt 4, Bild 1 von 3 ASUS G713RC RAM Replacement: Schritt 4, Bild 2 von 3 ASUS G713RC RAM Replacement: Schritt 4, Bild 3 von 3
    • Insert each RAM stick under the gray bar. Push until you hear a click.

    • Hold down the gray bar to make sure it is flat and secure.

    • It might be a bit bumpy, but it is nothing to worry about.

    • It is important that you don't completely remove the gray bar.

  5. ASUS G713RC RAM Replacement: Schritt 5, Bild 1 von 2 ASUS G713RC RAM Replacement: Schritt 5, Bild 2 von 2
    • Reattach the lid by connecting the white wires to the base.

    • Plug in the white wires on both sides. You want to plug them in thoroughly, otherwise, your laptop won't turn on.

  6. ASUS G713RC RAM Replacement: Schritt 6, Bild 1 von 2 ASUS G713RC RAM Replacement: Schritt 6, Bild 2 von 2
    • Line up the lid to the laptop.

    • Tighten the seven large screws using a Phillips #00 screwdriver.

    • Tighten the four small screws using a Phillips #00 screwdriver.

Ziellinie

Eine weitere Person hat diese Anleitung absolviert.

Javier Bobadilla

Mitglied seit: 10/23/24

157 Reputation

1 Anleitung geschrieben

Team

CSU Los Angeles, Team 4-99, Harris Fall 2024 Mitglied von CSU Los Angeles, Team 4-99, Harris Fall 2024

CSULA-HARRIS-F24S4G99

1 Mitglied

1 Anleitung geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 82

Letzte 30 Tage: 110

Insgesamt: 187