Einleitung
This is a prerequisite guide to replacing the components in an ATT CL2490 phone. In order to get to these components, the back panel must be removed. This guide shows how to remove the back panel safely and effectively.
Was du brauchst
-
-
Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.
-
-
-
-
Slide the metal spudger into the crack and continue around to the front panel of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.