Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Bad connections between the phone itself and the handset could be an issue. Replacing the defective internal phone jack will solve this problem.
Was du brauchst
-
-
Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.
-
-
-
Slide the metal spudger into the crack and continue around to the front panel of the phone.
-
-
-
-
Using the precision tweezers, bend the golden tips of the green and red wires upward.
-
Bend the wires slowly and gently to avoid breaking them.
-
-
-
After bending the golden wire tips, pull the wires out from the back side of the phone jack.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.