Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will lead you through the steps of removing the LCD monitor and its enclosure.
Was du brauchst
-
-
Open and push the screen back all the way until it is horizontal with the rest of the laptop.
-
Use an opening tool to remove the panel above the keyboard that has the power button on it.
-
After you have released the tabs, lift up the panel.
-
-
-
Under the panel, remove the two screws that connect the keyboard to the laptop.
-
-
-
Release the catch on the ribbon socket by sliding the two tabs toward the ribbon.
-
Pull the ribbon under the keyboard to detach it from the motherboard.
-
Remove the keyboard.
-
-
-
-
Unscrew the 2 screws at each corner located underneath the LCD screen.
-
-
-
Locate the wire connecting the LCD screen to the motherboard.
-
Detach the white rectangle located on the motherboard at the end of the wire.
-
-
-
Place the laptop upside down.
-
Locate the largest removable panel on the back and remove the four screws connecting it.
-
Lift up and remove the panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
8 weitere Nutzer:innen haben diese Anleitung absolviert.