Einleitung

Removing the back panel of the laptop expose the laptop to sensitive electronic components. Please be careful when you follow these procedures.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Unplug and power off the laptop.
    • Unplug and power off the laptop.

    • If the battery is still connected to the laptop, remove the battery.

  2. Flip over the laptop so that the back panel of the laptop is facing up.
    • Flip over the laptop so that the back panel of the laptop is facing up.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Use the Phillips #1 screwdriver to remove the eight 6.5 mm Phillips #1 screws. Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened.
    • Use the Phillips #1 screwdriver to remove the eight 6.5 mm Phillips #1 screws.

    • Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened.

  5. Remove the back panel of the laptop. Remove the back panel of the laptop. Remove the back panel of the laptop.
    • Remove the back panel of the laptop.

  6. Connect a grounding cord to a metal interface on the laptop.
    • Connect a grounding cord to a metal interface on the laptop.

    • Ground the laptop to prevent static electricity from damaging the electrical components inside the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Pnithan Jantarakolica

Mitglied seit: 22.09.2016

1.060 Reputation

10 Anleitungen geschrieben

Team

UC Davis, Team 2-4, Oliver Fall 2016 Mitglied von UC Davis, Team 2-4, Oliver Fall 2016

UCD-OLIVER-F16S2G4

5 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 175