Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
You will have to remove several screws and a couple of cables on the bottom of the ZG5 to remove or replace the wireless card.
Was du brauchst
-
-
Turn the netbook upside down with the battery at the top, facing away from you.
-
-
-
Unlock the battery by sliding the switch located near the left hinge to the left "unlocked" position.
-
-
-
Slide the latch located on the opposite hinge from the lock while pushing the battery up.
-
-
-
-
Gently loosen the two Phillips #0 screws in the small panel that covers the wireless card.
-
-
-
Remove the single 3.9 mm Phillips #1 screw from the bottom left of the wireless card.
-
-
-
Gently lift up the left side of the wireless card and slide the card out of its socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
8 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 7-49, Amido Fall 2010 Mitglied von Cal Poly, Team 7-49, Amido Fall 2010
CPSU-AMIDO-F10S7G49
5 Mitglieder
27 Anleitungen geschrieben
