Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The 4-cell battery on the Aspire R7 is not externally accessible and requires a small amount of disassembly in order to replace it.
Was du brauchst
-
-
Shut down the laptop and disconnect the power cord.
-
Turn the laptop over.
-
-
-
Remove seven 10 mm T7 screws.
-
Remove four 6 mm T7 screws.
-
Use the blue plastic opening tool to carefully remove both rubber pads which cover the four remaining screws.
-
Remove the remaining four 10 mm T7 screws.
-
-
-
-
Locate the battery ribbon connector
-
Remove the ribbon cable attaching the battery to the motherboard by carefully pulling it outwards
-
-
-
Remove the three 4.5mm #00 Phillips screws attaching the battery to the motherboard
-
Push the 4 retaining clips away from the battery
-
Carefully lift the battery from the motherboard
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
12 weitere Nutzer:innen haben diese Anleitung absolviert.
6 Kommentare
great instructions
hey how do you want då sel it for
super tuto
Thanks
P.S : A have add a short comment on step 2.
Bests regards