Was du brauchst
-
-
-
When you flip the track pad over, you will notice a small tape connecting the track pad to the computer
-
Disconnect the tape by gently pulling it down
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
UMass Dartmouth, Team S4-G6, Covino Spring 2018 Mitglied von UMass Dartmouth, Team S4-G6, Covino Spring 2018
UMASSD-COVINO-S18S4G6
3 Mitglieder
5 Anleitungen geschrieben
thank you NOT, because this is totally a very not good way!!! i broke some plastic-clips because of you!
here the better way for all:
at first you have to remove all screws from the backsite. dont forget the screws under the plasticplate where you can change the hdd. this screws hold the track pad and the keyboard (!!!!!!!) ! never use a METAL instrument like METAL SPUDGER ON PLASTIC !!! Please dont be so stupid to scrape off your plastics, an harder material will always damage the softer material, dont blame yourself like i do :-( ! anyway, then you can softley loosen the trackpad with your hands.... thank you
nicht angegeben - Antwort