Einleitung

How to replace the CMOS / BIOS Battery

____________________________________________________________________

Einführungsvideo

  1. Turn off the laptop and remove the battery. Remove two screws securing the Keyboard. The Keyboard is held by two locking clips, under the battery. Use the sharp tip of a plastic tool to release the keyboard.
    • Turn off the laptop and remove the battery.

    • Remove two screws securing the Keyboard.

    • The Keyboard is held by two locking clips, under the battery. Use the sharp tip of a plastic tool to release the keyboard.

  2. Remove the Keyboard and disconnect the two flex cables: Keyboard flex cable Keyboard Light flex cable
  3. Remove the screw securing the Optical drive and gently press the drive to show slightly as at the second pic. Slide the drive to the left and remove it. Slide the drive to the left and remove it.
    • Remove the screw securing the Optical drive and gently press the drive to show slightly as at the second pic.

    • Slide the drive to the left and remove it.

  4. Remove 4x phillips screws and disconnect: Power On button flex cable Touch pad flex cable
    • Remove 4x phillips screws and disconnect:

    • Power On button flex cable

    • Touch pad flex cable

    • Remove 18x Phillips screws from the bottom cover.

    • Remove any memory SD Card from the Card reader.

    • Start opening with a plastic opening tool.

    After removing the 18x Phillips screws, the laptop is VERY fragile in the hinge area. The bottom cover will easily crack or break in the hinge area when opening the laptop with no screws, particularly the left side near the power button. Possibly this step should be revised to recommend opening the laptop 90 degrees before removing the 18x screws. Or, advise extreme caution when opening the laptop with no screws.

    jonnyquest - Antwort

    Hi, do you know where buy screws that you mention in step 4? “Remove 18x Phillips screws from the bottom cover.”

    I am italian. Thank you anyway.

    Sara Caruso - Antwort

  5. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  6. Carefully separate the upper cover and remove it. Carefully separate the upper cover and remove it. Carefully separate the upper cover and remove it.
    • Carefully separate the upper cover and remove it.

  7. Gently remove the HDD and disconnect the SATA cable from it. Please SUBSCRIBE to my channel  ツ Please SUBSCRIBE to my channel  ツ
  8. Remove one Phillips screw, securing th WLan card and disconnect the two coaxial antenna cables. Remove the Wi-Fi card.
    • Remove one Phillips screw, securing th WLan card and disconnect the two coaxial antenna cables.

    • Remove the Wi-Fi card.

  9. Remove the Memory Cover. Disconnect the Loudspeaker cable connector. Disconnect the Loudspeaker cable connector.
    • Remove the Memory Cover.

    • Disconnect the Loudspeaker cable connector.

  10. Remove two Phillips screw from the Mother board and from the Optical drive  SATA adapter. Disconnect the LCD Display flex cable. Disconnect the DC Jack cable.
    • Remove two Phillips screw from the Mother board and from the Optical drive SATA adapter.

    • Disconnect the LCD Display flex cable.

    • Disconnect the DC Jack cable.

    • Carefully remove the Optical drive SATA adapter.

    • We will disconnect the battery cable when we pick up the board.

  11. Carefully pick up the Mother board and disconnect the Battery cable. Carefully pick up the Mother board and disconnect the Battery cable. Carefully pick up the Mother board and disconnect the Battery cable.
    • Carefully pick up the Mother board and disconnect the Battery cable.

  12. Use sharp plastic tool and remove the CMOS Battery. CR2032 - button cell lithium battery rated at 3.0 volts. .
    • Use sharp plastic tool and remove the CMOS Battery.

    • CR2032 - button cell lithium battery rated at 3.0 volts.

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit: 09.12.2013

162.894 Reputation

304 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

281 Mitglieder

791 Anleitungen geschrieben

I need assistance with the G2201 Hardware Gap, Im attempting to remove a HHD password for a customers machine on this same model

chemanemelton - Antwort

Hi. Thanks a lot. I manage to remove the CMOS battery, and I kept the laptop pc idle without the battery for nearly 7hrs. But still, when connected, I am asked for password/unlock key. Could you please help me how to discharge the CMOS.

amantaj - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 9

Letzte 7 Tage: 64

Letzte 30 Tage: 273

Insgesamt: 20,094