Zum Hauptinhalt wechseln

Einleitung

Use this guide to replace the SSD of your device.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Use a Phillips head screw driver to remove the 13 screws in these locations. Use a Phillips head screw driver to remove the 13 screws in these locations.
    • Use a Phillips head screw driver to remove the 13 screws in these locations.

  2. Use a plastic spudger to pry up the bottom cover and remove it. Be sure to pry along other edges if necessary to avoid damaging the back cover. Be sure to pry along other edges if necessary to avoid damaging the back cover.
    • Use a plastic spudger to pry up the bottom cover and remove it.

    • Be sure to pry along other edges if necessary to avoid damaging the back cover.

  3. Unscrew screw holding SSD card in place. Slide out the SSD card towards you to remove it.
    • Unscrew screw holding SSD card in place.

    • Slide out the SSD card towards you to remove it.

    • The SSD card is the blue chip on the right connected to the motherboard.

    • Be sure to store this screw apart from the others as it is a different length.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Robert Escobio

Mitglied seit: 27.09.2017

492 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team S9-G3, Remmell Fall 2017 Mitglied von USF Tampa, Team S9-G3, Remmell Fall 2017

USFT-REMMELL-F17S9G3

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 12

Insgesamt: 207