Einleitung

This guide will demonstrate how to partially take apart the Acer Chromebook C740-C4PE, in addition to removing the heatsink.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Make sure the laptop is turned off and laid down on a flat surface. Unscrew the thirteen  10mm screws on the back of the device using a Phillips #0 screwdriver. Use the spudger or any other prying tool to pry the back plate off of the device.
    • Make sure the laptop is turned off and laid down on a flat surface.

    • Unscrew the thirteen 10mm screws on the back of the device using a Phillips #0 screwdriver.

    • Use the spudger or any other prying tool to pry the back plate off of the device.

    • Be sure not to pry too hard as it may result in snapping the back plate.

  2. Remove the four 5mm  screws on the heatsink using the Phillips #0 screwdriver. Remove the four 5mm  screws on the heatsink using the Phillips #0 screwdriver.
    • Remove the four 5mm screws on the heatsink using the Phillips #0 screwdriver.

  3. Loosen the two Phillips-head screws on the fan attached to the heatsink. Loosen the two Phillips-head screws on the fan attached to the heatsink.
    • Loosen the two Phillips-head screws on the fan attached to the heatsink.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Detach the two antennae cables from the  WiFi card by gently pulling on them.
    • Detach the two antennae cables from the WiFi card by gently pulling on them.

  6. Gently pull the fan cable out of the motherboard.
    • Gently pull the fan cable out of the motherboard.

    • Pulling too hard may break the wires or the connector itself.

  7. Remove the cable routed through the fan.
    • Remove the cable routed through the fan.

    • Do not completely remove the cables as they are attached to the motherboard. Once they are no longer routed in the fan, leave them as they are.

  8. Remove the heatsink from the motherboard.
    • Remove the heatsink from the motherboard.

    • Before changing the heatsink/fan, you must clean off the thermal paste from the CPU and apply new thermal paste.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Dylan Tocci

Mitglied seit: 17.10.2017

237 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S6-G4, Rockett Fall 2017 Mitglied von UMass Dartmouth, Team S6-G4, Rockett Fall 2017

UMASSD-ROCKETT-F17S6G4

3 Mitglieder

6 Anleitungen geschrieben

What type of thermal paste is best used?

Tracey Arria - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 4

Letzte 30 Tage: 8

Insgesamt: 93