Zum Hauptinhalt wechseln

Einleitung

Use this guide to replace the trackpad in your device.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Make sure you turn off the laptop before starting. Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.
    • Make sure you turn off the laptop before starting.

    • Unscrew and remove the (11) eleven 4mm J0 head screws on the underside of the laptop using the JIS #0 screwdriver.

  2. Use the plastic opening tool to remove the back cover. Be careful not to damage the ribbon cable connecting the back cover to the laptop. Be careful not to damage the ribbon cable connecting the back cover to the laptop.
    • Use the plastic opening tool to remove the back cover.

    • Be careful not to damage the ribbon cable connecting the back cover to the laptop.

  3. Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place. Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.
    • Unscrew the (2) two 3mm J0 Phillips head screws that hold the battery in place.

  4. Disconnect the battery from the motherboard. Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.
    • Disconnect the battery from the motherboard.

    • Carefully disconnect the cable parallel to the board, not at an angle. Otherwise, you could damage the port.

  5. Carefully lift the battery from one side, and then lift it out of the laptop. Carefully lift the battery from one side, and then lift it out of the laptop.
    • Carefully lift the battery from one side, and then lift it out of the laptop.

  6. Remove the (3) three 7.0mm screws using the J0 screwdriver head. Remove the (3) three 7.0mm screws using the J0 screwdriver head.
    • Remove the (3) three 7.0mm screws using the J0 screwdriver head.

  7. Unlock the latches on both ends of the ribbon cable, and pull to detach. The ribbon cable will still be attached to the tape.
    • Unlock the latches on both ends of the ribbon cable, and pull to detach.

    • The ribbon cable will still be attached to the tape.

  8. Peel the tape that is on top of the trackpad.
    • Peel the tape that is on top of the trackpad.

  9. Lift the trackpad out of the Chromebook. Lift the trackpad out of the Chromebook.
    • Lift the trackpad out of the Chromebook.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Ashley Oxner

Mitglied seit: 26.09.2017

650 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team S11-G1, Passmore Fall 2017 Mitglied von USF Tampa, Team S11-G1, Passmore Fall 2017

USFT-PASSMORE-F17S11G1

3 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 6

Insgesamt: 304