Zum Hauptinhalt wechseln

Einleitung

This guide will go through how to replace the touch screen display of the Acer Chromebook Spin 15 CP315-1H-P1K8. Make sure to be careful when replacing the screen, the glass could shatter under pressure.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Make sure the device is fully powered off. Flip the computer over so that the back is facing up.
    • Make sure the device is fully powered off.

    • Flip the computer over so that the back is facing up.

    • Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

    Some of the screws are long and some are short - make sure you not which came out of which hold.

    Thomas Krauska - Antwort

    As always, I would recommend that you remember exactly where you remove the screws from, on this particular model, we did not see that the screws were different lengths. I would recommend sorting them in a pattern that is familiar, such as clockwise or counterclockwise. This way when replacing the screws you know exactly the order to put them back in.

    Evan Costa - Antwort

  2. Use the iFixit opening tools as wedges to pry the back of the laptop off. Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back. Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.
    • Use the iFixit opening tools as wedges to pry the back of the laptop off.

    • Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

  3. Remove the five 6mm Phillips #1 screws from the hinges on either side of the laptop. Remove the five 6mm Phillips #1 screws from the hinges on either side of the laptop.
    • Remove the five 6mm Phillips #1 screws from the hinges on either side of the laptop.

  4. Unplug the camera/microphone ribbon cable from the circuit board. Remove the single 3mm Phillips #1 screw from the Intel core. Unplug the cable from the circuit board.
    • Unplug the camera/microphone ribbon cable from the circuit board.

    • Remove the single 3mm Phillips #1 screw from the Intel core.

    • Unplug the cable from the circuit board.

  5. Use the plastic opening tool, create a gap  between the  back and front of the display. Lift the front out with your hands. Lift the front out with your hands.
    • Use the plastic opening tool, create a gap between the back and front of the display.

    • Lift the front out with your hands.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Evan Costa

Mitglied seit: 29.10.2019

503 Reputation

3 Anleitungen geschrieben

Team

UMass Dartmouth, Team S4-G1, Saloman Fall 2019 Mitglied von UMass Dartmouth, Team S4-G1, Saloman Fall 2019

UMASSD-SALOMAN-F19S4G1

3 Mitglieder

5 Anleitungen geschrieben

2 Kommentare

I just want to say that I’ve used this guide several times. My kid dropped the laptop and broke the hinge which is located inside the top cover behind the LCD panel. When this happened, it caused the grommets to come out of the plastic. But for about $45 we replaced the hinge and the top cover and I was able to fix it and put it all back together. I appreciate having this guide to remind me. Thank you!

Christopher Rayment - Antwort

Thank you so much for these instructions! The connections were the hardest part for me and the pictures were a great help.

Wendy Brooks - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 1

Letzten 7 Tage: 7

Letzten 30 Tage: 40

Insgesamt: 1,348