Einleitung

Heres how to get out your motherboard, if you want to solder on a new power button, or simply replace the whole thing.

  1. To start, gently separate one corner of the case using the black spudger.
    • To start, gently separate one corner of the case using the black spudger.

  2. Once you have successfully pried the spudger in between the front case and back case, continue do so around the entire tablet until the back case is completely disconnected.
    • Once you have successfully pried the spudger in between the front case and back case, continue do so around the entire tablet until the back case is completely disconnected.

  3. Locate the 4 screws and cable that hold in the two speakers.
    • Locate the 4 screws and cable that hold in the two speakers.

    • Use the Phillips #1 screwdriver to remove these 2mm black screws.

    • Remove the 2mm silver screws.

    • Not all 4 screws are going to be the same kind. This will not affect the speaker replacement.

    • Connector Cable

  4. Carefully remove the connector cable by pushing on the rim of black plastic insert.
    • Carefully remove the connector cable by pushing on the rim of black plastic insert.

  5. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  6. Unfortunately, the top speaker is a wedged under the motherboard.
    • Unfortunately, the top speaker is a wedged under the motherboard.

    • To get this speaker out, use the spudger and gently pry it out.

  7. Remove the 5mm screws that are securing the battery to the rest of the tablet.
    • Remove the 5mm screws that are securing the battery to the rest of the tablet.

    • Use the Phillips #00 Screwdriver to remove the 5mm screws.

  8. Use the sharper end of the spudger to disconnect the battery from the mother board.
    • Use the sharper end of the spudger to disconnect the battery from the mother board.

    • The battery connector will slide off.

  9. Using the Phillips #1 screwdriver, remove the screws near the edges of the tablet.
    • Using the Phillips #1 screwdriver, remove the screws near the edges of the tablet.

    • They may be different sizes, the silver are 5mm and the black are 2mm.

    I need a on off switch

    shutt2010 - Antwort

  10. Lift up on the black flaps to release the flat cables.
    • Lift up on the black flaps to release the flat cables.

    • Pull this Connector off.

  11. Use the spudger to detach the indicated cables.
    • Use the spudger to detach the indicated cables.

    • Remove the last motherboard screw under the rightmost cable. It is a silver 5mm.

  12. Disconnect the two gold connectors by pulling straight up on them with your fingers.
    • Disconnect the two gold connectors by pulling straight up on them with your fingers.

    • Like before, lift up on the black flap to detach the cable.

  13. Having disconnected all those pesky cables, the motherboard lifts cleanly out.
    • Having disconnected all those pesky cables, the motherboard lifts cleanly out.

    price for motherboard

    greenhulk5219 - Antwort

Abschluss

From here, you can solder on a new switch or put in the new motherboard. To reassemble your device, follow these instructions in reverse order.

18 weitere Nutzer haben diese Anleitung absolviert.

Kyle Libby

Mitglied seit: 07.04.2014

948 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 7-23, Regan Spring 2014 Mitglied von Cal Poly, Team 7-23, Regan Spring 2014

CPSU-REGAN-S14S7G23

4 Mitglieder

18 Anleitungen geschrieben

where can I get the switch?

Dan - Antwort

Thanks from France

Nicolas bacquaert - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 10

Letzte 30 Tage: 53

Insgesamt: 13,104