Einleitung
Use this guide to replace the Battery in the Acer Nitro 5 Acer Nitro 5 AN515-53-55G9. This laptop has a 4-cell battery, with this guide you can replace the battery if it is damaged or not working.
Was du brauchst
-
-
Flip the laptop upside down so that the bottom is facing up.
-
Identify the RAM tray on the bottom of the laptop.
-
-
-
Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.
-
Remove the RAM tray cover by prying up with a spudger.
-
-
-
Identify the Hard Drive tray to the left side of the laptop.
-
Remove screw with a #0 Philips screwdriver.
-
Lift up the Slot covering using a spunger.
-
-
-
-
Use the Phillips #0 screwdriver to remove the 9mm screws holding the back cover in place.
-
-
-
Carefully remove the back shell from the device working your way around all the edges.
-
-
-
Removing the back shell of the computer and it will look like this.
-
The battery for the device is located at the bottom middle of the laptop at this orientation.
-
-
-
Locate the connector of the battery to the motherboard.
-
Using your fingers, slide out the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
11 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Appalachian State University, Team S2-G2, Menagarishvili Spring 2019 Mitglied von Appalachian State University, Team S2-G2, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S2G2
3 Mitglieder
9 Anleitungen geschrieben
3 Kommentare
For future articles, you might consider adding a section describing how to “initialize” the replacement battery pack to maximize life.
Either that, or at least mention initialization plays a part in maximizing battery life and point to another article that provides reliable information.
Thanks for the article.
