Einleitung
Using the Acer S200HL LCD Monitor motherboard replacement and removal guide, this process will become easier using these simple iFixit steps.
Was du brauchst
-
-
Place the monitor screen face down.
-
Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.
-
Pull the stand away from the monitor.
-
-
-
Use the plastic opening tool to pry the back panel from the front panel.
-
Start at one point of the crease and pry along the edge of the entire monitor for the best results.
-
-
-
Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.
-
-
-
-
The following steps circled in yellow are the locations for detaching the three connectors shown in the picture.
Good morning sir my monitor mother board damaged sir.so please I want a mother board sir,how is getting and how much cost sir please tell me sir
Model :S200HL
LCD Monitor
-
-
-
Lift the black seal to release the small ribbon connector (the No Fuss Ribbon Cable connector) from the motherboard.
-
-
-
Lift the black seal to release the large ribbon connector (the ZIF connector).
-
-
-
Pull the bundled cable connector gently away from motherboard.
-
-
-
Gently lift the motherboard to remove it from the monitor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 12-3, Forte Fall 2014 Mitglied von Cal Poly, Team 12-3, Forte Fall 2014
CPSU-FORTE-F14S12G3
5 Mitglieder
10 Anleitungen geschrieben
