Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Shift the bike's rear derailleur onto the innermost gear.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Shift the front derailleur as far inward as it can go.

    • If the chain falls off, tighten the outside limit screw on top of the derailleur.

    • If the chain can't shift to the lower gear, loosen the outside limit screw on top of the derailleur.

    • Yes, the outer limit screw adjusts the inner derailleur limit.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Next, shift the rear derailleur onto the outermost gear.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 1
    • Shift the front derailleur as far outwards as you can.

    • If the derailleur shifts the chain off the gear, tighten the inner limit screw on top of the front derailleur.

    • If the derailleur is unable to shift onto the outer gear, loosen the inner limit screw on top of the front derailleur.

    • Just like last time, the inner limit screw adjusts the outer limit of the derailleur.

Ziellinie

Tobias Elder

Mitglied seit: 04/25/13

113 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 21-53, Johann Spring 2013 Mitglied von Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 16

Insgesamt: 1,809