Zum Hauptinhalt wechseln

Einleitung

The barrel is the orange piece into which you insert the darts.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together. Remove grey slider from the main body of the blaster. Remove grey slider from the main body of the blaster.
    • Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.

    • Remove grey slider from the main body of the blaster.

  2. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.
    • Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Jetzt kaufen
  4. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.
    • Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

  5. Remove the trigger, lifting from the bottom and pulling it out from under the metal pin. Remove the trigger, lifting from the bottom and pulling it out from under the metal pin. Remove the trigger, lifting from the bottom and pulling it out from under the metal pin.
    • Remove the trigger, lifting from the bottom and pulling it out from under the metal pin.

  6. Lift the barrel, pulling it out from under the black trigger catch Lift the barrel, pulling it out from under the black trigger catch Lift the barrel, pulling it out from under the black trigger catch
    • Lift the barrel, pulling it out from under the black trigger catch

Abschluss

To reassemble your device, follow these instructions in reverse order.

Joshua Taylor

Mitglied seit: 22.09.2014

101 Reputation

1 Anleitung geschrieben

Team

USF Tampa, Team 3-1, Brown Fall 2014 Mitglied von USF Tampa, Team 3-1, Brown Fall 2014

USFT-BROWN-F14S3G1

3 Mitglieder

5 Anleitungen geschrieben

I don't remember this blaster's shell as being held closed by solvent weld or catches - why is the "iFixit" pry-tool necessary?

Arasin Staubly - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 164