Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Air Blasters Tek Six Barrel Replacement

Was du brauchst

  1. Air Blasters Tek Six Barrel Replacement, Remove screws of the grey slider: Schritt 1, Bild 1 von 3 Air Blasters Tek Six Barrel Replacement, Remove screws of the grey slider: Schritt 1, Bild 2 von 3 Air Blasters Tek Six Barrel Replacement, Remove screws of the grey slider: Schritt 1, Bild 3 von 3
    • Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.

    • Remove grey slider from the main body of the blaster.

  2. Air Blasters Tek Six Barrel Replacement, Remove screws in main  body: Schritt 2, Bild 1 von 3 Air Blasters Tek Six Barrel Replacement, Remove screws in main  body: Schritt 2, Bild 2 von 3 Air Blasters Tek Six Barrel Replacement, Remove screws in main  body: Schritt 2, Bild 3 von 3
    • Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

  3. Air Blasters Tek Six Barrel Replacement, Take the main body apart: Schritt 3, Bild 1 von 3 Air Blasters Tek Six Barrel Replacement, Take the main body apart: Schritt 3, Bild 2 von 3 Air Blasters Tek Six Barrel Replacement, Take the main body apart: Schritt 3, Bild 3 von 3
    • Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

  4. Air Blasters Tek Six Barrel Replacement, Remove the trigger: Schritt 4, Bild 1 von 3 Air Blasters Tek Six Barrel Replacement, Remove the trigger: Schritt 4, Bild 2 von 3 Air Blasters Tek Six Barrel Replacement, Remove the trigger: Schritt 4, Bild 3 von 3
    • Remove the trigger, lifting from the bottom and pulling it out from under the metal pin.

  5. Air Blasters Tek Six Barrel Replacement, Removing the barrel: Schritt 5, Bild 1 von 3 Air Blasters Tek Six Barrel Replacement, Removing the barrel: Schritt 5, Bild 2 von 3 Air Blasters Tek Six Barrel Replacement, Removing the barrel: Schritt 5, Bild 3 von 3
    • Lift the barrel, pulling it out from under the black trigger catch

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 3-1, Brown Fall 2014 Mitglied von USF Tampa, Team 3-1, Brown Fall 2014

USFT-BROWN-F14S3G1

3 Mitglieder

5 Anleitungen geschrieben

Ein Kommentar

I don't remember this blaster's shell as being held closed by solvent weld or catches - why is the "iFixit" pry-tool necessary?

Arasin Staubly - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 415