Zum Hauptinhalt wechseln

Einleitung

The reload slider spring brings the reload slider back to the front once the blaster is ready to fire.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together. Remove grey slider from the main body of the blaster. Remove grey slider from the main body of the blaster.
    • Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.

    • Remove grey slider from the main body of the blaster.

  2. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together. Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.
    • Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

  3. Laptop-Akkus

    Wenig Aufwand, große Wirkung.

    Jetzt kaufen

    Laptop-Akkus

    Wenig Aufwand, große Wirkung.

    Jetzt kaufen
  4. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed. Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.
    • Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

  5. Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely. Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely. Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely.
    • Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely.

  6. Using a screwdriver, remove the 7.5 mm phillips 00 screw holding the top spring to the reload slider. Using a screwdriver, remove the 7.5 mm phillips 00 screw holding the top spring to the reload slider.
    • Using a screwdriver, remove the 7.5 mm phillips 00 screw holding the top spring to the reload slider.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Alfredo Antolinez

Mitglied seit: 22.09.2014

301 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team 3-1, Brown Fall 2014 Mitglied von USF Tampa, Team 3-1, Brown Fall 2014

USFT-BROWN-F14S3G1

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 5

Insgesamt: 193