Zum Hauptinhalt wechseln

Einleitung

The Motherboard is the most complicated part of the phone to remove because almost all of the phones components are connected to it. This guide will show you how to properly remove the Alcatel Pop 4 Plus Motherboard in a few simple steps. Be gentle with removing the connectors and make sure you line them up properly when snapping them back together.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Alcatel Pop 4 Plus Motherboard Replacement, Battery: Schritt 1, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement, Battery: Schritt 1, Bild 2 von 2
    • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

  2. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 2, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement: Schritt 2, Bild 2 von 2
    • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

  3. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 3, Bild 1 von 1
    • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

  4. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 4, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement: Schritt 4, Bild 2 von 2
    • Use the flat end of the spudger disconnect the battery from the motherboard.

    • Use the flat end of the spudger tool to pry out the battery.

  5. Alcatel Pop 4 Plus Motherboard Replacement, Motherboard: Schritt 5, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement, Motherboard: Schritt 5, Bild 2 von 2
    • Use a spudger to flip up the retaining flap on the USB ribbon cable ZIF socket.

    • Slide the ribbon cable out of the socket.

  6. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 6, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement: Schritt 6, Bild 2 von 2
    • Use the flat end of a spudger to disconnect the ribbon cable.

  7. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 7, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement: Schritt 7, Bild 2 von 2
    • Using the flat end of the spudger to disconnect the ribbon cable.

  8. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 8, Bild 1 von 2 Alcatel Pop 4 Plus Motherboard Replacement: Schritt 8, Bild 2 von 2
    • Using the flat end of the spudger, disconnect the camera from the motherboard.

  9. Alcatel Pop 4 Plus Motherboard Replacement: Schritt 9, Bild 1 von 1
    • Use the flat end of the spudger to pry off the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

USF Tampa, Team S20-G6, Passmore Spring 2018 Mitglied von USF Tampa, Team S20-G6, Passmore Spring 2018

USFT-PASSMORE-S18S20G6

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 3

Letzten 30 Tage: 6

Insgesamt: 834