Einleitung

This guide will show you how to take out your Alcatel Pop 4 Plus rear facing camera for replacement/repair.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
    • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

  2. Remove seventeen 3mm Phillips #000 screws from the mid-frame. Remove seventeen 3mm Phillips #000 screws from the mid-frame.
    • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.
    • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

  5. Use the flat end of the spudger disconnect the battery from the motherboard. Use the flat end of the spudger tool to pry out the battery.
    • Use the flat end of the spudger disconnect the battery from the motherboard.

    • Use the flat end of the spudger tool to pry out the battery.

  6. Use the flat end of the spudger tool to remove the connector.
    • Use the flat end of the spudger tool to remove the connector.

  7. Pry out the camera with the pointy end of the spudger tool.
    • Pry out the camera with the pointy end of the spudger tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Maalik Poleon

Mitglied seit: 25.01.2018

196 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team S20-G6, Passmore Spring 2018 Mitglied von USF Tampa, Team S20-G6, Passmore Spring 2018

USFT-PASSMORE-S18S20G6

4 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 65