Einleitung
Upgrade your hard drive for more storage space.
Was du brauchst
-
-
First, take off the battery by moving the latch to the left and pulling it up.
-
-
-
Then unscrew the two Phillips screws.
-
Pull the cover down, then up, revealing the internals
-
-
-
-
Unscrew the four screws indicated
-
Pull on the tab that says "Pull" and remove the Hard Drive
-
-
-
With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.