Zum Hauptinhalt wechseln

Einleitung

There are three internal fans located in the Alienware M18x laptop. This guide will demonstrate how to go about removing said fans.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Turn the computer over. Slide the battery latch over and lift the battery out. Slide the battery latch over and lift the battery out.
    • Turn the computer over.

    • Slide the battery latch over and lift the battery out.

  2. Unscrew the four indicated screws with a J000 screwdriver.
    • Unscrew the four indicated screws with a J000 screwdriver.

  3. Use the plastic pryer tool to lift the bottom cover off. Use the plastic pryer tool to lift the bottom cover off.
    • Use the plastic pryer tool to lift the bottom cover off.

  4. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  5. With the back cover removed, locate the desired fan to replace. With the back cover removed, locate the desired fan to replace.
    • With the back cover removed, locate the desired fan to replace.

  6. Use a J000 screwdriver to loosen the screws that secure the fan(s). There are three internal fans within the laptop. Locate the correct screws to loosen for the desired fan to replace based on the provided corresponding images. There are three internal fans within the laptop. Locate the correct screws to loosen for the desired fan to replace based on the provided corresponding images.
    • Use a J000 screwdriver to loosen the screws that secure the fan(s).

    • There are three internal fans within the laptop. Locate the correct screws to loosen for the desired fan to replace based on the provided corresponding images.

  7. The fan will be connected to the motherboard by a cable. Use plastic tweezers to gently unplug this connection. The fan will be connected to the motherboard by a cable. Use plastic tweezers to gently unplug this connection. The fan will be connected to the motherboard by a cable. Use plastic tweezers to gently unplug this connection.
    • The fan will be connected to the motherboard by a cable. Use plastic tweezers to gently unplug this connection.

  8. The fan is now fully disconnected from the computer. Gently remove the fan by lifting upwards. The fan is now fully disconnected from the computer. Gently remove the fan by lifting upwards.
    • The fan is now fully disconnected from the computer. Gently remove the fan by lifting upwards.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jonathan Panella

Mitglied seit: 21.02.2018

411 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team S21-G1, Banghart Winter 2018 Mitglied von Cal Poly, Team S21-G1, Banghart Winter 2018

CPSU-BANGHART-W18S21G1

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 7

Insgesamt: 83