Einleitung

Prying the case open will inevitably cause damage. This method disengages the catches to allow the case to be easily opened by hand.

The technique is probably applicable to the Intel Mini which has similar catches, but has not been tried.

Ersatzteile

Kein Ersatzteil erforderlich.

Instead of a putty knife a dozen or more 1-1/2" pins are required.
  • Instead of a putty knife a dozen or more 1-1/2" pins are required.

Kommentar hinzufügen

With the computer upside down identify the apertures where the catches are located along either side and also at the front.
  • With the computer upside down identify the apertures where the catches are located along either side and also at the front.

  • Insert the pins from the adjacent apertures between the wall and each catch. Be very careful to keep the pins against the case wall. This is more obvious from the second photo with the case removed.

Kommentar hinzufügen

  • Lift the case off from the back first.

  • Remove the pins from the main assembly.

Kommentar hinzufügen

Abschluss

Re-assembly does not require the pins. Place the case over the computer and press down evenly on the sides, not the middle. Ensure the back panel is correctly aligned before finally pushing home the catches.

14 weitere Nutzer haben diese Anleitung absolviert.

Donald Todd

Mitglied seit 22.09.2010

472 Reputation

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 27

Insgesamt: 13,107