Einleitung
Use this guide to replace the ribbon cable in the Amazon Echo Dot 2nd Generation.
Was du brauchst
-
-
Power off and unplug the echo
-
Using the plastic opening tool, peel off the rubber layer on the bottom of the echo
-
-
-
Use a T8 screwdriver bit to unscrew the 1.6mm four screws.
-
Remove the black cylindrical base
-
-
-
-
Use the metal spudger to lift the ZIF connector
-
Remove the ribbon cable from the slot
-
-
-
Remove the silver divider
-
Remove the black rubber divider
-
Remove the plastic white frame
-
-
-
Use the metal spudger to lift the ZIF connector
-
Remove the ribbon cable from the slot on the LED/speaker board
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team S1-G3, Leahy Fall 2017 Mitglied von USF Tampa, Team S1-G3, Leahy Fall 2017
USFT-LEAHY-F17S1G3
3 Mitglieder
12 Anleitungen geschrieben
5 Kommentare
Where do you get the replacement cable from?
Yes, where can one get replacement ribbon cables?
Where do you get the replacement cable from?
I need a replacement as well now was using a pointed tweezers when putting it back together and stabbed the cable need to find part and order from the uk
no cable available, just waiting for donors
