Einleitung
Use this guide to remove and replace the speaker in the Amazon Echo Dot 2nd Generation.
Was du brauchst
-
-
Power off and unplug the echo
-
Using the plastic opening tool, peel off the rubber layer on the bottom of the echo
-
-
-
-
Use the T8 screwdriver bit to unscrew the four 1.6mm torx screws
-
Remove the black, cylindrical base
-
-
-
Tap the base against the palm of your hand so that the black speaker component comes out
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
14 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team S1-G3, Leahy Fall 2017 Mitglied von USF Tampa, Team S1-G3, Leahy Fall 2017
USFT-LEAHY-F17S1G3
3 Mitglieder
12 Anleitungen geschrieben
3 Kommentare
Can you inform us were to get replacement speaker please.
Yeah where can we buy the speaker? This tutorial doesn’t show how to replace it, it shows where to find it
